Silicone Charge Air Connectors
Isolate Intake Piping Vibration
Our three styles of charge air connectors are designed to ease connections in air intake system piping: they compensate for slight misalignment and isolate vibration between hose connections. The silicone elastomer material resists chemicals, steam, ozone, coolants and aging conditions normally found in any engine operating environment. All three charge air connectors are for installation on the pressure side with maximum operating temperatures up to 260°C. They are orange in color to be easily identifiable as tolerant of high temperatures.
4-Ply Bellows
Hump Hose Connector
Fiberglass Connector/Sleeve
Use the illustration as a guide for installing your Silicone Charge Air Connector.
Hump Hose Connectors Part Inner Dia
Connectors/Sleeves Part Inner Dia
Outer Dia
Length
Outer Dia
Length
Number
mm
mm
mm
Number
mm
mm
mm
P532960 P532961 P532962
72 78 85
140 108 111
P532946 P532947 P532948 P532949 P532950 P532951 P532952 P532953 P532954 P532956 P532957 P532958 P532959
32 38 51 57 64 76 86 86 86 89 89 89
38 44 57 63 69 82 92 92 92 95 95 95
914 914 914 914 914 914
70 76
4-Ply Bellows Part
Inner Dia
Outer Dia
Length
No of rings
89
Number
mm
mm
mm
152 914
P535572 P532943 P535571 P532944 P532945 P535573
89
95
152 152 152 152 191 203
3 0 2 3 3 3
102 102 102 102 102
107 107 107 107 107
89
114 914 914
102
107
140 n Engine Air Cleaners, Accessories & Service Parts
Powered by FlippingBook