XRB Air Cleaner
When specifying an Air Cleaner… Determine the Airflow Requirements of your engine, then find the corresponding m ³ /min. airflow in the charts below. The restriction numbers - shown in mbar at the left side of the chart - indicate the approximate initial restriction of each model air cleaner at that m ³ /min. When calculating total initial restriction of the entire air intake system, include the restriction caused by ducting, elbows, pre-cleaners, etc. The estimated lab life hours are indicated at the right side of the chart.
XRB Performance Curves
0036 h Vac Valve
Performance Curves B100127
Performance Curves B080080
Air Flow (m 3 /min)
Air Flow (m 3 /min)
Restr. A/c Piezo
LL62mbar
Performance Curves B120470
'RQDOGVRQ&RQILGHQWLDO 3DJH
'RQDOGVRQ&RQILGHQWLDO
3DJH
Air Flow (m 3 /min)
3DJH
'RQDOGVRQ&RQILGHQWLDO
Restr. A/c Piezo
LL62mbar
All performance curves are according ISO 5011 standards - Restriction measured at Piezo All tests are done with ISO Coarse at Dust Concentration of 1g/m³
3DJH
Installation Recommendations
• Air cleaner orientation is horizontal, with the drop tube pointing down - within +/- 15°. For service clearance, allow the entire length of the filter for removal and 35 mm for service cover latches. • Mounting is M8 x 1,25 with a maximum torque of 20,34 Nm. • Connections: Inlet/Outlet maximum torque 4.52 Nm. • Inlet accessory note: The air cleaner housing can accommodate a lightweight inlet hood, but not a pre-cleaner or any other accessory. Use of an unapproved intake accessory will void your Donaldson warranty. • Filter Service Indicator port arrives with plug/cap. Order filter service indicator separately. See accessories section. Indicator port maximum torque 2 Nm.
58 n Engine Air Cleaners, Accessories & Service Parts
Powered by FlippingBook