Mechanical Performance, continued Pressure Testing:
Mounting & Service Assembly Mounting: ¨ Side ¨ Top
¨ Bottom ¨ Other: _______________________________ Filter Change Interval: _________________ ¨ km or ¨ miles or ¨ hours _ Do you require installation, service or maintenance recommendations from Donaldson? ¨ Yes ¨ No Inventory Managed by Donaldson? ¨ Yes ¨ No ___________________________ Packaging Do you have any special packaging requirements? ¨ Yes ¨ No If yes, please check all that apply: Protective caps: ¨ on inlet ¨ on outlet ¨ on port Final Assembly: ¨ Bulk / Bagged ¨ Bulk / Individual Boxes ¨ Other _________________________________ _________________________________ Product Markings Do you have any product marking requirements? Head Assembly? ¨ Yes ¨ No Filters? ¨ Yes ¨ No If yes, artwork it is assumed customer will provide artwork for filter markings. Donaldson can provide marking area for artwork design. Standard installation icons are available from Donaldson. Special Requirements or Application Notes Use this area to provide additional information that will assist Donaldson engineering. __________________________________________ __________________________________________ __________________________________________ __________________________________________
Frequency (Hz)
Min. Cycles
Range (kPa)
Hydrodynamic
to
Flow Fatigue
to
Vibration
to
Leak Testing: Test Method : _______________________________ Minimum Value: __________________kPA Filtration Performance Test Conditions: Method: __________________________________ Flow Rate ___________________ (l/min) Fluid Viscosity: ___________________ cSt Final Restriction:__________________ (kPa) Max. Initial Restriction: _____________ kPa @ _________ cSt Avgerage Particle Efficiency (size & %) > ____ µm > ____ µm > ____ µm > ___ µm
%
%
%
%
Min. Beta Ratio: β (x) = Y X > _____________ Y>__________________
Minimum Capacity: _____________gms
Validation Tests For Special Fluids: __________________________________________ __________________________________________
For Donaldson USE ONLY Date Received: _____________________________
¨ Catalog ¨ Web Site ¨ Other _______________________
Request From:
Assigned to: Business Unit: _____________________________ Account Manager: _________________________ Product Manager: __________________________ Engineer: _________________________________
Donaldson Company, Inc. Minneapolis, MN
Doc. No. F115346 ENG (4/21) © 2021 Donaldson Company, Inc. All rights reserved. Printed in the U.S.A. Donaldson Company, Inc. reserves the right to change or discontinue any model or specification at any time and without notice.
Engine Liquid Applications Engineering
Powered by FlippingBook