Service Instructions
FIK-FIO(T) FHK-FIR SRK-Combo 200 + 300
FBK-FRCA FBK-FACA
FLK-FLS FLK-FLA
FPK02&04-AP220 FPK02-AP280 FPK03&04-AP420 FMK-FM FCK-LC
FIK-FIS SRK-Combo 120
HMK04 HMK05
2
4
3
2
4
3
1
Open empty housing in correct order
1
Remove carton ring before use
Check if O-ring between lid and housing is installed and intact
Check if O-Ring on cartridge is installed and intact
For FIK: Mount O-ring over stud
For Low Pressure cartridges: Mount spring on cartridge
Mount element in housing
For Combo 120: Align arrows as shown
Assemble lid on housing
2
2
4
4
3
3
1
Assemble bolts and screws in correct order
1
Degrease surface where sparepart sticker will be mounted Only for cartridge type filters For spin-ons: hand tighten until contact between O-ring and head is made; and then continue by hand as indicated on spin-on Tighten screws, bolts or lid until thread ends
Sparepart sticker in each sparepart box
Fix sparepart sticker in area indicated – Ready!
Do not forget seals
Hydraulic Filters & Accessories • 161
Powered by FlippingBook